Repairs to uPVC Windows

uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. In contrast to aluminium and timber, they don't get rusty or decay.

It is important to clean and oil UPVC windows and doors on a regular basis. This will prevent unnecessary repair costs and improve the efficiency of energy.

1. Broken Glass

The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.

For single pane windows it is fairly easy to replace windows, and the new one will generally fit within the old frame very easily. However when you have double glazed window repairs pane windows that are anchored by internal beading, it'll be more difficult to get rid of the existing panes and install new ones. In this instance it is essential to purchase plastic spacers to help the new pane fit into the window frame.

Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not on the floor and could be trampled under.

Once the glass is removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to prevent water and drafts from entering the home until a professional can come out and repair the window. This also serves as an obstacle to stop intruders from getting into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also includes an opening. This will provide the best of both.

2. Sagging

uPVC is durable, energy-efficient and affordable alternative to timber sash window. As time passes, they may develop a variety of issues, including sliding. A sagging uPVC windows can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from getting worse.

Repositioning the hinges can help fix a window that is sagging. To do this, you'll have to open the window to access the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. After you've repositioned the hinges, shut your window and check for an appropriate fit. If you're happy with the fit, you can tighten the screws until they remain in place.

If you cannot reposition the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, leading them to loosen. It is important to replace your seal as soon as you can to ensure that your uPVC window watertight and draughtproof.

uPVC handles can also loosen up. Most often it is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and perform a test to ensure that it fits. The joints at the corners of the sash must align with the joint on the casing. If it does not, you can use the screwdriver to loosen the handle. Then turn the mechanism into position.

3. Water Leaks

It is important to take action if awake each day to find mouldy walls and wet floors. The leaks of water through windows could cause structural damage to your home and also affect your ability to regulate the temperature of your home. The most common reason for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be completed by any DIYer who has the ability. Depending on how severe the issue is, old caulking may need to be removed. When it comes to uPVC repair, it is important to avoid over-caulking. This will make your window more difficult to clean and lower its energy efficiency.

Verify that the drainage holes have no debris inside them and ensure that the sill pan has been properly angled to drain away from the window. In more serious cases you may need to think about replacing the window.

Mold spots and rotted sills are another sign of water leakage. The mold thrives in damp environments and is able to quickly spread throughout the home.

It is also important to remember that if the leakage originates from the glass of your Double glazed window repairs near me glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.

4. Faulty Hinges

Hinges may be to blame if your uPVC window is difficult to open or if it opens with a breeze. These are easily replaced by any competent DIYer and can usually be completed in just a few minutes.

Nearly every home in the UK will have either top hung or side-hung uPVC windows that use hinges and, just like any mechanical component they will wear out over time. It's very simple to replace a hinge on a window but it's much easier if someone else helps hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by checking for the arrows on each hinge, this indicates the direction in which the window should open.

The issue can be caused by opening the window incorrectly or due to a poor installation in the factory. It is usually possible to fix the issue by sending us a photo via our website and we will be happy to give you suggestions.

It is also crucial to grease the hinges regularly. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also lower the chance of windows sticking and help prevent corrosion. The ideal time to do this once a year. WD40 and double Glazed window repairs near me other solvent based lubricants are not recommended as they can damage the parts of your uPVC window repair.

5. Draughts

Draughts can be caused by different factors. The hinges can also become unbalanced due to wear, causing a gap where the sash and frame meet. These can be easily fixed by giving them a good cleaning, but if they are beyond repair it may be necessary to get them aligned or replaced. Secondly the interlock, this is located on the hinge side of the window, may be misaligned. Again, it may be feasible to give them a good clean, but in some instances it could be necessary to have these replaced.

These seals are susceptible to wear and tear or get damaged over time, allowing air to escape. Installing high-quality weatherstripping will help to stop draughts. Another alternative is to replace the window with low-emissivity glass. this will help in regulating indoor temperatures and will lessen the risk of draughts.

The final method to cut down on drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. These will keep your home warm by blocking cold air.

With a little regular maintenance and repair, your upvc windows will continue to provide a great level of insulation and security for your home. It is crucial to recognize that all windows have a lifespan and eventually, they will reach the point when it's more economical to replace them than repair them. If you have any problems with your Upvc window you should consult an expert as soon as you can.